简要说明：奥康盛泰牌的不锈钢薄板激光切割加工产品：估价：1，规格：完善，产品系列编号：齐全

　　在北京，有很多的激光切割加工厂家，可以进行各种金属材料的加工服务，如不锈钢、碳钢、合金钢等，但每个厂家制作的产品质量不同。其原因是因为厂家在进行产品的加工时，对设备的参数设定不是很准确，导致了激光切

割加工的产品质量没有达到客户所需要的。所以在选择激光切割的厂家时，最好选择有几年加工经验的厂家。
不锈钢薄板激光切割加工哪家好
激光切割在生活中的使用很多，其中激光切割还可以分为一下的几种加工：
1.激光汽化切割：利用高能量密度的激光束加热工作，迅速产生的高温对材料的便秘进行汽化形成蒸汽，这些蒸汽在喷出时，实现对材料的表面进行切割，所以激光汽化切割时需要很大的功率和功率密度。激光汽化切割多用于

极薄金属材料和非金属材料的切割。www.akstzs.com   www.akstzs.cn
2.激光熔化切割：用激光加热使金属材料熔化，然后通过与光束同轴的喷嘴喷吹非氧化性气体，依靠气体的强大压力使液体金属排出，形成切口，激光熔化切割不需要使用金属完全汽化。激光熔化切割主要用于一些不易氧化的

材料或活性金属的切割，如不锈钢，钛，铝及其合金等www.bjsnst.com
3 激光氧气切割：原理类似与氧乙炔切割，它是用激光作为预热热源，用氧气等活性气体作为切割气体，喷吹出的气体一方面与切割金属作用，发生氧化反应，放出大量的氧化热，另一方面把熔融的氧化物和熔化物从反应去吹

出，在金属中形成切口，由于切割过程中的氧化反应产生了大量的热，而切割速度远远大于激光汽化切割和熔化切割。激光氧气切割主要用于碳钢，钛钢以及热处理钢等易氧化的金属材料。
Which is good for laser cutting of stainless steel sheet
In Beijing, there are a lot of laser cutting processing factories, can be a variety of metal materials processing services, such as stainless steel, carbon steel, alloy steel, etc., but the quality of the products

made by each of the different. The reason is because the manufacturers in the process of production, the parameters of the equipment is not very accurate, resulting in the quality of laser cutting is not up

to the customer's needs. So in the choice of laser cutting manufacturers, the best choice for a few years of experience in the factory.
Which is good for laser cutting of stainless steel sheet
Laser cutting in the life of a lot of use, including laser cutting can also be divided into several processing:
1 laser vaporization cutting: the use of high energy density of the laser beam heating work, the rapid generation of high temperature on the material of the vaporization of the formation of steam, the

steam in the spray, the surface of the material to be cut, so laser vaporization cutting requires a lot of power and power density. Laser vaporization for cutting thin metal materials and nonmetal materials.

Www.akstzs.cn www.akstzs.com
2 laser melting and cutting: with laser heating to melt the metal material, and then through the coaxial nozzle with a non oxidizing gas, relying on the strong pressure of the gas to make the liquid metal

discharge, forming an incision, laser melting and cutting does not require the use of metal complete vaporization. Laser melting and cutting are mainly used for some difficult oxidation of the material or

active metal, such as stainless steel, titanium, aluminum and its alloy www.bjsnst.com
3 laser oxygen cutting: principle similar to oxygen acetylene cutting, it is used as a heat source of laser, oxygen and other active gas as the cutting gas, gas and cutting metal, oxidation reaction, release a

lot of oxidation heat, on the other hand, the molten oxide and melt away from the reaction, the formation of a cut in the metal, and cutting speed is much greater than laser vaporization cutting and

melting. Laser oxygen cutting is mainly used for carbon steel, titanium steel and heat treatment of steel and other metal material easy oxidation.