详细介绍:
概述Summary
进口高压小型阻火器一般采用不锈钢作为阀体和阻火层材质,锻打制造,耐高温高压,应用火焰通过热导体的狭小孔隙时,由于热量损失而熄灭的原理设计制造,阻止火焰蔓延的装置。广泛应用于可燃气体管道,如汽油、煤油、轻柴油、笨、甲笨、原油等油品的储灌或火炬系统、气体净化通化系统、气体分析系统、煤矿瓦斯排放系统、加热炉燃料气的管网上、也可用在乙炔、氧气、氮气、天然气的管道用品。
High pressure small flame arrester using
stainless steel as the body and the fire resistant layer material, forging
manufacturing, high temperature and high pressure, and application of flame
through narrow pore heat conductor, because the heat loss and out of the
principle design and manufacturing, device to prevent the spread of flame.
Widely used in combustible gas pipeline, such as gasoline, kerosene, light
diesel oil, benzene, toluene, crude oil storage tanks or torch gas purification
system, Tonghua system, gas analysis system, coal mine gas drainage system,
heating furnace fuel gas pipeline network, and can also be used in acetylene,
oxygen, nitrogen, natural gas plumbing supplies.
参数Parameters
公称压力: PN16、PN32、PN40、PN50Mpa
Nominal pressure: PN16, PN32, PN40, PN50Mpa
公称通径:DN3~DN50
Nominal diameter: DN3 ~ DN50
焊接管外径Welded
pipe diameter
∮10,∮12,∮14,∮16,∮18,∮20,∮22,∮25,∮28,∮30,∮32,∮40,∮42,∮50,∮57
适用介质:加压天然气CNG﹑煤气、沼气等
Suitable medium: CNG, water, gas etc.
适用温度:-20℃~+120℃ -70℃~180℃等
Applicable temperature: -20℃~+120℃ -70℃~180℃
制造材料:20#﹑1Cr18Ni9Ti﹑304﹑316﹑316L﹑12Cr1Mov等
Material: 20#, 1Cr18Ni9Ti, 304, 316, 316L,
12Cr1Mov etc.
业绩Performance
中国石油天然气集团公司,深圳空港油料加气站,北京市燃气集团有限责任公司,重庆燃气集团,河南蓝天燃气股份有限公司,新疆燃气(集团)有限公司,成都城市燃气有限责任公司,太原煤炭气化(集团)有限责任公司,新疆广汇实业股份有限公司等。
|