详细介绍:
供应正品HONEYWELL霍尼韦尔M9484E1017执行器山西代理商
联系人:魏工 电话:15882174684
座机:028-84472033
QQ:2030149354
产品资料:
Vibration resistance Frequency 10 to 55 Hz, 0.35-mm single amplitude, acceleration 50 m/s2
10 sweeps of 5 min each in X, Y, and Z directions
Shock resistance 100 m/s2, 3 times each in 6 directions along three axes (up/down, left/right, forward/backward)
Degree of protection Terminal section: Finger protection
Indicators
Note: The input across L1 and L2 is used for the internal power
supply. Therefore, the power indicator will not be lit if there is no
input across L1 and L2.
Setting Knobs
Note: 1. Use either a solid wire of 2.5 mm2 maximum or a ferrule with
insulating sleeve for the terminal connection.
The length of the exposed current-carrying part inserted
into the terminal must be 8 mm or less to maintain dielectric
strength after connection.
Recommended ferrules
Phoenix Contact
• Al 1,5-8BK (for AWG16)
• Al 1-8RD (for AWG18)
• Al 0,75-8GY (for AWG18)
2. Tightening torque
Recommended: 0.49 N·m
Maximum: 0.54 N·m
Power indicator
Relay status indicator
Overvoltage knob (OVER)
Undervoltage knob (UNDER)
Operating time knob (T) Alarm indicator
Terminal block (See notes 1 and 2.)
Terminal block (See notes 1 and 2.)
Item Meaning
Power indicator
(PWR: Green)
Lit when power is being supplied (see note).
Relay status indicator
(RY: Yellow)
Lit when relay is operating (normally lit).
Alarm
indicator
(ALM:
Red)
Overvoltage:
Red
Lit when there is an overvoltage.
|