简要说明：美国omega牌的CL125校验仪稳定货源产品：估价：1，规格：CL125校验仪，产品系列编号：CL125

CL125校验仪

温度校准器
CL123 CL125 and CL100MA
温度校准器

模拟信号的温度或过程

手持式温度校验仿真模型cl123马，MV，V，赫兹，或K型热电偶，J，E，T（在°C或°F）信号 

对K型热电偶，J，E，T，R，手持式热电偶校验器的仿真模型cl125，N，L，U，B，C（在°C，°F K）信号 

手持过程校准仪模型cl100ma为4-20 mA，0-20 mA模拟，0-24马式信号

简单的按钮程序

欧米茄?CL100系列是紧凑的，易于使用的手持式校准器提供精确的输出信号。模型包括热电偶校准仪，温度校准仪，或过程校准器。单位不读信号。模型，专注于模拟热电偶，电压和输出信号。

一般规格

：9V碱性电池（包括）

显示器：4和5位数

操作温度：0到50°C（32至122°F）

存储温度：20到60°C（4至140°F）

操作/存储湿度：＜85%的相对

尺寸：88×168×26毫米（3.5 x 6.6 x 1”）

重量：330克（11.6盎司）

CL123
Features
4-20 mA (1K. load, 24 V loop supply)
0-100.00 mV, 0-1.0000 V, 0-12.000 V
K,J,E,T Thermocouples (°C & °F)
Frequency 1-62500 Hz
0-20 mA, 0-24 mA Selectable
0-100% range setting in mA, mV, V, mode
Beeper Warning when Output is Open (mA)
Basic Accuracy: 0.025%
0-24 mA ±0.025% ±0.003 mA
0-100 mV ±0.05% ±0.03 mV
0-1 V ±0.05% ±0.0003 V
0-10 V ±0.05% ±0.003 V
Thermocouples:
K: -200 to 1370, ±0.9°C
J: -100 to 760, ±0.8°C
E: -100 to 700, ±0.7°C
T: -200 to 400, ±0.8°C
Frequency: 1 to 125 Hz, ±0.04 Hz, 126 to 62,500 Hz, ±0.01% ±0.04 Hz (604 Available Frequencies)
Thermocouple Connection:SMP (miniature) type on front
Process Connection:45 cm (18") red and black leads attached to side of unit
CL125
Features
11 Types of Thermocouples
°C, °F, K Temperature Scales
Internal/External Temperature Reference
Auto-Ramp and .T Function
Easy Keypad Programming
Basic Accuracy: 0.3°C/0.6°F
Resolution: 0.1°C/0.2°F (K,J,E,T,N,U,L)
0.2°C/0.4°F (R,S,B,C)
Range:
K: -200 to 1370°C R: 0 to 1767°C
J: -200 to 1200°C S: 0 to 1767°C
E: -200 to 1000°C B: 600 to 1800°C
T: -200 to 400°C N: -200 to 1300°C
C: 0 to 2300°C U: -200 to 600°C
L: -200 to 900°C
Thermocouple Connection:SMP (miniature) type on front
CL100MA
Features
4-20 mA with 1 μA resolution
Auto-Ramp and Easy Step Functions
1-100% Input
0-20 mA, 0-24 mA Selectable
Easy Keypad Programming
Range Resolution Accuracy
0-4 mA 0.001 mA 0.025% + 10 μA
4-20 mA 0.001 mA 0.025% + 5 μA
20-24 mA 0.001 mA 0.025% + 5 μA
Process Connection: 45 cm (18") red and black leads attached to side of unit
 

注释: Each unit supplied with rugged carrying case, complete operator’s manual, 9 V battery, external battery pack (without batteries) holds four AA batteries (models CL123 & CL100MA), type K thermocouple (models CL123, CL125), test leads and alligator clip (models CL123 & CL100MA). Units are for simulation (not reading) of temperature or process signals.

产品型号/产品描述
CL123 Multifunction Handheld Temperature Calibrator and Process Calibrator
CL125 Handheld, Temperature Calibrator, Thermocouple Calibrator
CL100MA mA loop calibrator
选配件
CL123-ADAPTOR-115V 115 V power supply for CL123 and CL100MA
CL123-ADAPTOR-230V 230 V power supply for CL123 and CL100MA, European Plug
 CL125校验仪