详细介绍: S 311铝镁合金焊丝
Copper
alloys
铜
合
金
|
S 225
|
Cu48 Ni10
Zn Rem.
|
Melting point is about 935℃and high strength. Braze welding of steel, nickel and carbide alloys.
熔点约935℃。高强度,钎焊钢、镍及硬质合金用
|
RBCuZn-D
|
S 225F
|
Cu48 Ni10
Zn Rem.
|
S225 welding rod coated with flux.
外涂焊剂的S225焊丝
|
RBCuZn-D
|
S 226
|
Cu60 Sn0.3
Si0.2 Zn Rem.
|
Melting point is about 900℃. Gas welding of brass, also braze welding of copper, steel and cast iron.
熔点约900℃。黄铜气焊用,也可钎焊铜、钢、铸铁
|
|
S 227
|
Cu58Sn0.9Ni0.5
Si0.1 Fe0.8
Zn Rem.
|
Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
熔点880℃。黄铜气焊及碳弧焊用,也可钎焊铜、钢、铸铁
|
RBCuZn-B
|
S 229
|
Cu55 Ni6 Mn4
Zn余
|
Melting point is about 920℃, high strength. Braze welding of steel, nickel and hard carbide.
熔点约920℃。高强度,钎焊钢、镍及硬质合金用
|
|
Aluminum alloys
铝
合
金
|
S 301
|
Al≥99.5
|
Good ductility and corrosion resistance. Gas welding and argon arc welding of pure aluminum.
塑性好、耐蚀。纯铝气焊、氩弧焊用
|
ER1100
|
S 311
|
Si5 Al Rem.
|
Corrosion resistance, wide range of usage. Gas welding and argon arc welding of aluminum alloys other than high magnesium alloys.
抗裂性好,通用性大。铝合金气焊、氩弧焊用。不宜用高镁合金
|
ER4043
|
S 321
|
Mn1.3 Al Rem.
|
Good corrosion resistance, weldability and ductility. Gas welding and argon arc welding of aluminum alloys.
良好的耐蚀性、可焊性及塑性。铝合金气焊、氩弧焊用
|
|
S 331
|
Mg5 Mn0.4
Al Rem.
|
Corrosion resistance and high strength. Argon arc welding of aluminum alloys.
耐蚀,强度高。铝合金氩弧焊用
|
ER5183
|
|