商铺名称:东莞市茂东机电有限公司
联系人:吴亚辉(先生)
联系手机:
固定电话:
企业邮箱:128feige@163.com
联系地址:东莞市石排镇石排大道中188号兆丰商务大厦
邮编:523000
联系我时,请说是在牵牛钢材网上看到的,谢谢!
KEY FEATURES
A - At | 0,1 s →100 h | 1 changeover relay | 8 A | Screw terminals | 24 V DC / 24 →240 V AC | 88827115 |
Timing ranges (7 ranges) | 1 s - 10 s - 1 min - 10 min - 1 h - 10 h - 100 h |
Repetition accuracy with constant parameters | ± 0.5?% (IEC/EN 61812-1) |
Drift Temperature | ± 0,05?% / °C |
Drift Voltage | ± 0,2?% / V |
Display accuracy according to IEC/EN 61812-1 | ± 10?% / 25 °C |
Immunity from micro power cuts : typical | < 10 ms |
Minimum pulse duration typically (relay version) | 30 ms |
Minimum pulse duration typically (solid state version) | 50 ms |
Minimum pulse duration typically (relay version under load) | 100 ms |
Maximum reset time by de-energisation typically (relay version) | 120 ms |
Maximum reset time by de-energisation typically (solid state version) | 350 ms |
Multi-voltage power supply | Depending on version |
Frequency (Hz) | 50 / 60 |
Operating factor | 100?% |
Operating range | 85 →110?% Un 85 →120?% Un for 12 V AC / DC |
Max. absorbed power | 32 VA (240 VAC) 1,5 W (240 VDC) 0,6 W (24 VDC) 0,7 VA (12 VAC) 0,7 W (12 VDC) |
Rated power | 2000 VA/80 W |
Maximum breaking current | 8 AAC 250 VAC resistive 8 ADC 30 VDC resistive |
Minimum breaking current | 10 mA / 5 VDC |
Voltage breaking capacity | 250 VAC / 8 AAC resistive 250 VDC / 0,3 A resistive |
Electrical life (operations) | 1058 A 250 VAC resistive |
Mechanical life (operations) | 10 x 106 |
Breakdown voltage acc. to IEC/EN 61812-1 | 2,5 kV / 1 min / 1 mA / 50 Hz |
Impulse voltage acc. to IEC/EN 60664-1, IEC/EN 61812-1 | 5 kV wave 1.2 / 50 μs |
1 or 2 changeover relays, AgNi (cadmium-free) | 1 C/O |
Conformity to standards | IEC/EN 61812-1 IEC/EN 61000-6-1 IEC/EN 61000-6-2 IEC/EN 61000-6-3 IEC/EN 61000-6-4 |
Certifications | CE, UL, cUL, CSA, GL |
Temperature limits use (°C) | -20 →+60 |
Temperature limits stored (°C) | -30 →+60 |
Installation category (acc. to IEC/EN 60664-1) | Voltage surge category III |
Creepage distance and clearance acc. to IEC/EN 60664-1 | 4 kV / 3 mm |
Protection (IEC/EN 60529) | IP20 |
IP40 | |
Degree of protection acc. to IEC/EN 60529 Front face | IP50 |
Vibration resistance acc. to IEC/EN 60068-2-6 | 20 m/s210 Hz →150 Hz |
Relative humidity no condensation acc. to IEC/EN 60068-2-30 | 93?% non-condensing |
Electromagnetic compatibility - Immunity to electrostatic discharges acc to IEC/EN 61000-4-2 | Level III (Air 8 kV / Contact 6 kV) |
Immunity to radiated, radio-frequency, electromagnetic field acc. IEC/EN 61000-4-3 | Level I (1 V/m : 2,0 G Hz →2,7 G Hz) Level II (3 V/m : 1,4 G Hz →2,0 G Hz) Level III (10 V/m : 80 M Hz →1 G Hz) |
Immunity to rapid transient bursts acc. to IEC/EN 61000-4-4 | Level III (direct 2 kV / Capacitive coupling clamp 1 kV) |
Immunity to shock waves on power supply acc. to IEC/EN 61000-4-5 | Level III (2 kV / common mode 2 kV/residual current mode 1 kV) |
Immunity to radio frequency in common mode acc. to IEC/EN 61000-4-6 | Level III (10V rms : 0.15 M Hz to 80 M Hz) |
Immunity to voltage dips and breaks acc. to IEC/EN 61000-4-11 | 0?% residual voltage, 1 cycle 70?% residual voltage, 25/30 cycles |
Mains-borne and radiated emissions acc. to EN 55022 (CISPR22), EN55011 (CISPR11) | Class B |
Fixing : Symmetrical DIN rail | 35 mm |
Terminal capacity Single-wire without ferrule | 1 x 0,5 →3,3 mm2(AWG 20 →AWG 12) 2 x 0,5 →2,5 mm2(AWG 20 →AWG 14) |
Terminal capacity Multi-wire with ferrule | 1 x 0,5 →2,5 mm2(AWG 20 →AWG 14) 2 x 0,5 →1,5 mm2(AWG 20 →AWG 16) |
Housing material | Self-extinguishing |
Shock test IEC/EN 60068-2-27 | 15 g - 11 ms |
Short interruption on power line acc to IEC/EN 61000-4-11 | 0?% residual voltage, 250/300 cycles |
Spring terminals, 2 terminals per connection point - flexible wire | 2 x 0,5 →1,5 mm2(AWG 20 →AWG 16) |
Spring terminals, 2 terminals per connection point - rigid wire | 2 x 0,5 →1,5 mm2(AWG 20 →AWG 16) |
Weight : casing 17,5 mm | 88827105 (MUR1) : 63 g 88827115 (MAR1) : 63 g 88827125 (MBR1) : 63 g 88827135 (MCR1) : 62 g 88827145 (MHR1) : 63 g 88827150 (MLR4) : 63 g 88827155 (MLR1) : 64 g 88827100 (MUR4) : 62 g 88827103 (MUR3) : 66 g 88827503 (MURc3) : 59 g 88827150 (MLR4) : 63 g 88827185 (MXR1) : 63 g 88827004 (MUS2) : 55 g 88827014 (MAS5) : 53 g 88827044 (MHS2) : 53 g 88827054 (MLS2) : 56 g |
Insulation resistance according to IEC/EN 60664-1 | 100 MΩ (500 V DC) |